| 1)
Values as per DIN 15401 part 1 and part 2 and DIN 15402
part 1 and part 2.
2)
In the use of resultant material as per DIN 17200 or
for a diameter of the resultant material over 250 mm
according to the steel and iron materials sheet, SEW
550, the following special exigencies are in supplementary
assignments :
- The steel must contain >= 0,020 Al total or otherwise
it has to be proved that the steel is free of nitrogen.
- For a testing temperature of -20ºC, it has to
be obtained a prescribed value of >= 27 J in the
longitudinal test ISO-V (L).
3)
For economic reasons, for instance for material stockage
reduction, it is admissible the using of StE-355 instead
of StE-285.
|
